View MCH6702_1277740.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Ordering number : ENN6684A
MCH6702
PNP Epitaxial Planar Silicon Transistor Schottky Barrier Diode
MCH6702
DC/DC Converter Applications
Features
*
Package Dimensions
unit : mm 2191A
[MCH6702]
0.25
0.3 4 5 6 0.15
*
*
0.25
0.07
Composite type with a PNP transistor and a Schottky barrier diode contained in one package facilitatiing high-density mounting. The MCH6702 consists of two chips which are equivaient to the MCH6101 and SBS006, respectively. The ultrasmall package facilitates miniaturization in end products. (mounting height 0.85mm).
2.1
1.6
32 0.65 2.0
1
6
5
4
(Bottom view)
1 : Base 2 : Emitter 3 : Anode 4 : Common(Collector/Cathode) 5 : Common(Collector/Cathode) 6 : Common(Collector/Cathode) SANYO : MCPH6
0.85
1
2
3
(Top view)
Specifications
Absolute Maximum Ratings at Ta=25C
Parameter [TR] Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Current (Pulse) Base Current Collector Dissipation Junction Temperature Storage Temperature [SBD] Repetitive Peak Reverse Voltage Non-repetitive Peak Reverse Surge Voltage Average Output Current Surge Current Junction Temperature Storage Temperature VRRM VRSM IO IFSM Tj Tstg 50Hz sine wave, 1 cycle 30 30 0.7 10 --55 to +125 --55 to +125 V V A A C C VCBO VCEO VEBO IC ICP IB PC Tj Tstg Mounted on a ceramic board(600mm2!0.8mm) -15 -15 --5 --1.5 --3 --300 1.0 150 --55 to +125 V V V A A mA W C C Symbol Conditions Ratings Unit
Marking : PB
Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
20502 TS IM / O1000 TS IM TA-3025 No.6684-1/4
MCH6702
Electrical Characteristics at Ta=25C
Parameter [TR] Collector Cutoff Current Emitter Cutoff Current DC Current Gain Gain-Bandwidth Product Output Capacitance Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage Turn-ON Time Storage Time Fall Time [Di] Reverse Voltage Forward Voltage Reverse Current Interterminal Capacitance Reverse Recovery Time VR VF1 VF2 VF3 IR C trr IR=0.5mA IF=0.3A IF=0.5A IF=0.7A VR=10V VR=10V, f=1MHz IF=IR=100mA, See specified Test Circuit 30 0.35 0.42 0.5 20 10 0.40 0.47 0.55 200 V V V V A pF ns ICBO IEBO hFE fT Cob VCE(sat) VBE(sat) V(BR)CBO V(BR)CEO V(BR)EBO ton tstg tf VCB=-12V, IE=0 VEB=-4V, IC=0 VCE=-2V, IC=--100mA VCE=-2V, IC=--300mA VCB=-10V, f=1MHz IC=--750mA, IB=--15mA IC=--750mA, IB=--15mA IC=--10A, IE=0 IC=--1mA, RBE= IE=--10A, IC=0 See specified Test Circuit See specified Test Circuit See specified Test Circuit --15 --15 --5 50 90 15 200 350 17 --120 --0.85 --180 --1.2 --0.1 --0.1 560 MHz pF mV V V V V ns ns ns A A Symbol Conditions Rathings min typ max Unit
Electrical Connection
4 5 6
1
2
3
Switching Time Test Circuit [TR]
PW=20s D.C.1% INPUT IB2 OUTPUT IB1 VR 50 RB
trr Specified Circuit [Di]
Duty10% 100mA 10mA trr
10s
+ 220F VBE=5V + 470F VCC= --5V
--5V
IC= --20IB1=20IB2= --750mA
100mA
RL
50
100
10
No.6684-2/4
MCH6702
--1.0 --0.9
IC -- VBE
[TR] VCE= --2V
1000 7 5 3 2
hFE -- IC
Ta=75C
--25C
[TR] VCE= --2V
Collector Current, IC -- A
--0.8 --0.7 --0.6
DC Current Gain, hFE
100 7 5 3 2 10 7 5 3 2
25C
--0.4 --0.3 --0.2 --0.1 0 0 --0.2 --0.4
Ta=75C 25C --25C
--0.5
--0.6
--0.8
--1.0
--1.2 IT01661
1.0 --0.01
2
3
5
7 --0.1
2
3
5
7 --1.0
2
3
5
Base-to-Emitter Voltage, VBE -- V
1000 7
Collector Current, IC -- A
100 7
IT01662
f T -- IC
[TR] VCE= --2V Output Capacitance, Cob -- pF
Cob -- VCB
[TR] f=1MHz
Gain-Bandwidth Product, f T -- MHz
5 3 2
5 3 2
100 7 5 3 2
10 7 5 3 2
10 --0.01
2
3
5
7 --0.1
2
3
5
7 --1.0
2
3
1.0 --1.0
2
3
5
7
--10
2
3
Collector Current, IC -- A
--1000 7
IT01663
VCE(sat) -- IC
Collector-to-Base Voltage, VCB -- V
--1000 7
IT01664
[TR] IC / IB=20
VCE(sat) -- IC
[TR] IC / IB=50
Collector-to-Emitter Saturation Voltage, VCE(sat) -- V
3 2
Collector-to-Emitter Saturation Voltage, VCE(sat) -- V
5
5 3 2
--100 7 5 3 2
=7 Ta
C 5
--100 7 5 3 2
7 Ta=
5C
C 25
5 --2
C
25
C
--25
C
--10 7 --0.01
2
3
5
7 --0.1
2
3
5
7 --1.0
2
3
--10 7 --0.01
2
3
5
7 --0.1
2
3
5
7 --1.0
2
3
Collector Current, IC -- A
--10 7
IT01665
Collector Current, IC -- A
--10 7 5 3 2 --1.0 7 5 3 2 --0.1 7 5 3 2
IT01666
VBE(sat) -- IC
[TR] IC / IB=50
ASO
ICP= --3A IC= --1.5A
10
[TR]
10
Base-to-Emitter Saturation Voltage, VBE(sat) -- V
5
Collector Current, IC -- A
3 2
--1.0 7 5 3 2
Ta= --25C
1 DC 00m op s era tio n
ms
50
0
s
1m
0
s
s
75C
25C
--0.1 --0.01
2
3
5
7 --0.1
2
3
5
7 --1.0
2
3
--0.01 --0.1
Ta=25C Single pulse Mounted on a ceramic board(600mm2!0.8mm)
2 3 5 7 --1.0 2 3 5 7 --10 2 3
Collector Current, IC -- A
IT01667
Collector-to-Emitter Voltage, VCE -- V
IT02478
No.6684-3/4
MCH6702
1.4
PC -- Ta
[TR]
2
IF -- VF
[SBD]
1.2
1.0 7
Collector Dissipation, PC -- W
Forward Current, IF -- A
1.0
5 3 2 0.1 7 5 3
0.8
do
na
bo
ard
0.2 0 0 20 40 60 80 100 120
m)
160
2 0.01
140
0
0.2
75C
m2 !0
.8m
50
0.4
C
0.4
(60
0m
25
0.6
ic
C
ce
ram
Ta= 125 C 10
ou
nte
0C
M
0.6
0.8 IT01670
Ambient Temperature, Ta -- C
100 7 5 3 2
IT01669
Average Forward Power Dissipation, PF(AV) -- W
IR -- VR
Forward Voltage, VF -- V
0.7
[SBD]
PF(AV) -- IO
[SBD]
0.6
Reverse Current, IR -- mA
10 7 5 3 2 1.0 7 5 3 2 0.1 7 5 3 2 0.01 0
Ta=
C 125
100C 75C 50C
0.5
qRectangular wave =60 wRectangular wave =120 eRectangular wave =180 rSine wave =180 q Rectangular wave
wr
e
0.4
0.3
360
0.2
Sine wave
0.1 180 0 0 360 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9
25C
5
10
15
20
25
30 IT01671
Reverse Voltage, VR -- V
Average Rectified Current, IO -- A
IT01672
Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of February, 2002. Specifications and information herein are subject to change without notice.
PS No.6684-4/4

▲Up To Search▲

Price & Availability of MCH6702

	To Download MCH6702 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .